SMART WATER MONITORING SYSTEM

1) Temperature and Humidity Sensor(External Temp Sensor)

2) Rain water Sensor 

3) pH Sensor Kit

SEN-10972 

Features:

• pH probe
• pH Range: 0-14 (Na+ error at >12.3 pH)
• Speed of Response: 95% in 1 second
• Isopotential point: pH 7.00 (0 mV)
• Offset: +/- 0.20 pH
• 3 buffer solutions and storage solution
• 38400 baud rate default

Documents:

• Datasheet (pH Circuit)
• Dimensional Drawing (BNC Connector)
• Wiring Diagram
• Example Code
• Arduino
• Arduino I²C
• Arduino Mega
• Raspberry Pi
• PIC

or MinipH pH interface

https://www.sparkyswidgets.com/product/miniph/

4) Dissolved Oxygen  (Sensor for Arduino) Full range dissolved oxygen readings from 0.01 to +35.99 mg/L • Accurate dissolved oxygen readings down to the hundreds place (+/- 0.2) • Temperature compensation • Salinity compensation • Pressure compensation • Flexible calibration protocol supports one point or two calibration • Calibration required only once per year with an Atlas Scientific™ Dissolved Oxygen probe • Single reading or continuous reading modes • Data format is ASCII

5) BMP180 High Precision Digital Barometric Pressure Sensor Board Module Arduino Pressure range: 300~1100hPa (elevation 9000 m ~-500 m)     Power supply voltage: 1.8V~3.6V (VDDA), 1.62V~3.6V (VDDD)     LCC8 package: lead-free ceramic carrier package (LCC)     Size: 3.6mmx3.8x0.93mm     Low power consumption: 5 µA, in standard mode     High accuracy: low-power mode, the resolution of 0.06hPa (0.5 m)     High linearity mode, resolution of 0.03hPa (0.25 m)     With temperature output     I2C interface     Temperature compensation     Lead-free, in line with the RoHS standard     MSL 1-response time: 7.5ms     Standby current: 0.1 μA     No external clock circuit     INR 410/-rs Design Of the Drome what I sketched

• Tweet
• Share
• Share
• Share
• Share

About Dev Pratap

Dev Pratap is Engineering student ,he is an active blogger and a Space enthusiast, He has Involved in many theoretical research in astronomy and space science,he has served as Volunteer for SETI Home for a period of 5 years in BOINC(Berkley Open Infrastructure for Network Computing).

Related Post